TL-W3MB2 - Omron TL-W3MB2 Switch - Proximity Switch Simple Type: Switch
Request Quote
For Price
- Part Number:
- TL-W3MB2
- Model Number:
- TL-W3MB2
- Make:
- OMRON
- Lead Time:
- Available
- Qty In Stock:
- Available
Omron TL-W3MB2 Switch - Proximity Switch Simple Type: Switch
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Maximum Operating Temperature: + 70 C
- Minimum Operating Temperature: - 25 C
- Mounting Style: Bracket
- Output Configuration: PNP
- Sensing Distance: 3 mm
- Sensing Method: Inductive
- Supply Voltage: 12 VDC to 24 VDC
Specifications
- (with no condensation)
- (with no icing or condensation)
- CE marking: Equipped
- Company standard: Oil-proof
- EMS: EN60947-5-2
- EN60947-5-2
- Immunity Burst: IEC61000-4-4
- Immunity Conducted Disturbance: IEC61000-4-6
- Immunity ESD: IEC61000-4-2
- Immunity RF-interference: IEC61000-4-3
- Power supply reverse polarity protection
- Storage: -25 to 70 CEL
- Storage: 35 to 95 %RH
- Accessories: Instruction manual, Mounting bracket
- Ambient humidity: Operating: 35 to 95 %RH
- Ambient temperature: Operating: -25 to 70 CEL
- Applicable standard (CCC mark): Not equipped
- Applicable standard (EC Directive (EMC Directive)): EMI: EN60947-5-2
- Applicable standard (EC Directive (Low Voltage Directive)): EN60947-1
- Connection method: Pre-wired models (Cable length: 5 m)
- Control output (Output type): PNP open collector output
- Control output (Residual voltage): (DC) 1 V Max. (under load current with cable length of 2m)
- Control output (Switching capacity): 0 to 100 mA (30VDC Max.)
- Current consumption: 15 mA Max. (at 24VDC)
- Degree of protection: IEC60529: IP67
- Dielectric strength: 1000 VAC 50/60 Hz for 1 minute between charged parts and the case
- Differential distance: 10% Max. of sensing distance
- Indicator: Detection indicator(red)
- Insulation resistance: 50 M OHM Min. at 500VDC between charged parts and the case
- Material (case): Heat-resistant ABS resin
- Material (sensing surface): Heat-resistant ABS resin
- Operating voltage range: 10 to 30 VDC
- Operation mode: NC
- Power supply voltage: 12 to 24 VDC (ripple(p-p) :10% Max.)
- Protective circuit: Surge suppressor
- Response frequency: DC: 600 Hz (average)
- Sensing distance: 3 mm -10% to +10%
- Sensing method: Inductive type
- Setting distance: 0 to 2.4 mm
- Shock resistance: 500m/s2 for 3 times each in X, Y, and Z directions
- Standard sensing object: Iron 12*12*1mm
- Temperature influence: +-10% Max. of sensing distance in temperature range of -25 to +70CEL
- Type: Unshielded
- Vibration resistance: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
- Voltage influence: +-2.5% Max. of sensing distance in rated voltage range +-10%. (As the basis for sensing distance at standard power voltage)
Applications
- None Available
Aliases
- None Available